Home>Products>PLASTIC PIPE TESTING

PLASTIC PIPE TESTING

Plastic Pipe Testing Equipment | PE, PVC & PPR Laboratory Systems

Plastic pipe testing equipment for ISO 1167 hydrostatic pressure, ISO 1133 melt flow, ISO 2505 reversion, ISO 3127 impact, Vicat, OIT, carbon black, and ring stiffness workflows.

Lithostek plastic pipe testing equipment is organized around the complete production-control sequence: raw-material identity and processability, thermal stability, dimensional response, short- and long-term pressure behavior, impact resistance, and structural performance of the finished pipe. The launch range adds melt-flow, HDT/Vicat, hydrostatic pressure and burst, drop-weight impact, and longitudinal reversion systems while reusing proven instruments already published elsewhere on the site: DSC for oxidation induction time, carbon black content, carbon black dispersion, and pipe ring stiffness. Final configuration is confirmed against pipe material, diameter, wall thickness, pressure class, conditioning temperature, station count, end closures, utilities, safety enclosure, and the exact edition of the requested ISO or ASTM method.

Performance Selection Criteria

Start with the pipe material and product standard

PE, PVC-U, PVC-C, PP, PPR, PB, conduit, drainage, and structured-wall pipe specifications call for different combinations of raw-material, thermal, pressure, impact, and structural tests.

Separate material checks from finished-pipe tests

Melt flow, OIT, and carbon black characterize the compound; hydrostatic pressure, impact, reversion, Vicat, and ring stiffness verify the manufactured pipe or fitting.

Size pressure and impact systems around the specimen

Confirm outside diameter, wall thickness, test pressure, conditioning temperature, duration, station count, end closures, tank capacity, hammer mass, striker geometry, and drop height before quotation.

Plan utilities and long-duration operation

Hydrostatic projects may require conditioned tanks, water treatment, compressed air, drainage, independent channels, failure detection, backup power, remote alarms, and a safe burst-test area.

Standards & Compliance Matrix

StandardMethodology
ISO 1167Mapped to LS-HPT10 technical workflow.
ISO 1133Fully integrated into Lithostek workflow protocols.
ISO 2505Mapped to LS-LRO3 technical workflow.
ISO 3127Mapped to LS-DWI500 technical workflow.
ISO 9969Fully integrated into Lithostek workflow protocols.
ASTM D1598Mapped to LS-HPT10 technical workflow.

*Our systems support 200+ global variations of ASTM, EN, AASHTO, and BS codes. Contact engineering for specific compliance mapping.

Testing Workflows

Priority Products

LS-HPT10 10-Station Pipe Hydrostatic Pressure & Burst System | ISO 1167, ASTM D1598, ASTM D1599
LS-HPT10

10-Station Pipe Hydrostatic Pressure & Burst System

ISO 1167ASTM D1598ASTM D1599
LS-DWI500 Plastic Pipe Drop-Weight Impact Tester | ISO 3127, ASTM D2444
LS-DWI500

Plastic Pipe Drop-Weight Impact Tester

ISO 3127ASTM D2444
LS-MFI450 Automatic Melt Flow Indexer (MFR/MVR) | ISO 1133-1, ISO 1133-2, ASTM D1238
LS-MFI450

Automatic Melt Flow Indexer (MFR/MVR)

ISO 1133-1ISO 1133-2ASTM D1238
LS-HDT3 Three-Station HDT & Vicat Tester | ISO 75-1, ISO 75-2, ISO 306, ISO 2507, ASTM D648, ASTM D1525
LS-HDT3

Three-Station HDT & Vicat Tester

ISO 75-1ISO 75-2ISO 306ISO 2507ASTM D648ASTM D1525
LS-LRO3 Pipe Longitudinal Reversion Oven | ISO 2505
LS-LRO3

Pipe Longitudinal Reversion Oven

ISO 2505

Plastic Pipe Testing Equipment Laboratory Setup

Plan a complete Plastic Pipe Testing Equipment laboratory around your daily methods. Lithostek integrates equipment configuration, performance verification, calibration documentation, operator training, and service support for ISO 1167, ISO 1133, ISO 2505, ISO 3127 workflows in construction materials testing laboratories.

Consult Engineering

Frequently Asked Questions

A practical core laboratory commonly combines melt-flow testing, DSC/OIT, carbon black content and dispersion for raw materials; HDT/Vicat and longitudinal reversion for thermal behavior; hydrostatic pressure and burst plus drop-weight impact for finished-pipe performance; and a universal or ring-stiffness machine for mechanical tests. The exact matrix comes from the pipe material and product standard.

Hydrostatic endurance testing holds a specified internal pressure and temperature for a defined period, while burst testing increases pressure to failure over a shorter procedure. ISO 1167, ASTM D1598, and ASTM D1599 use different specimen preparation, pressure histories, and result criteria, so the method must be selected before configuration.

Often yes, but the pressure range, channel hardware, conditioned tank, end closures, seals, connectors, and safety provisions must cover every requested diameter, pressure class, temperature, and material. Large-diameter or high-pressure projects may require dedicated fixtures or separate tanks.

Yes. They remain in their established Thermal Analysis and Mechanical Testing URLs to preserve navigation and SEO history, while this category links them into the plastic pipe workflow instead of duplicating the same product pages.

Need More Information?

Contact our team to learn more about our plastic pipe testing equipment solutions and find the perfect equipment for your needs.

Get A Quote
RETURN TO TOP ↑