Home>Products>LABORATORY WEIGHING

LABORATORY WEIGHING

Laboratory Balances & Weighing Equipment

Laboratory weighing equipment including 0.01 mg semi-micro, 0.1 mg analytical, precision, high-capacity, hydrostatic density balances, and moisture analyzers.

Lithostek laboratory weighing equipment is organized around the parameters that determine real measurement fit: maximum capacity, readability, repeatability, linearity, minimum usable sample weight, calibration method, pan geometry, stabilization behavior, interfaces, and the installation environment. The range covers 0.01 mg semi-micro balances, 0.1 mg analytical balances, routine precision balances, high-capacity top-pan systems, hydrostatic weighing assemblies for density and absorption workflows, and rapid halogen moisture analyzers. Readability is a display increment, not a standalone accuracy claim; every quotation confirms the complete performance specification and calibration-document scope.

Performance Selection Criteria

Match readability to the smallest net sample

Start with the smallest amount that must be weighed reliably, then review repeatability and the laboratory's permitted uncertainty rather than selecting on decimal places alone.

Check capacity with the vessel included

Maximum capacity must include the container, tray, basket, fluid fixture, or other tare load used by the method.

Choose the calibration workflow

Confirm internal adjustment, external calibration weights, traceable certificate requirements, routine check weights, and the destination laboratory's quality procedure.

Control the weighing environment

Air currents, vibration, static charge, temperature drift, humidity, bench stability, and warm-up time become increasingly important as readability improves.

Standards & Compliance Matrix

StandardMethodology
ASTM C127Mapped to LS-HDB5 technical workflow.
ASTM C128Mapped to LS-HDB5 technical workflow.
AASHTO T84Mapped to LS-HDB5 technical workflow.
EN 1097-6Mapped to LS-HDB5 technical workflow.

*Our systems support 200+ global variations of ASTM, EN, AASHTO, and BS codes. Contact engineering for specific compliance mapping.

Testing Workflows

Priority Products

LS-SM100 Dual-Range Semi-Micro Balance (0.01 mg)
LS-SM100

Dual-Range Semi-Micro Balance (0.01 mg)

LS-AB210 Analytical Balance (210 g / 0.1 mg)
LS-AB210

Analytical Balance (210 g / 0.1 mg)

LS-PB6000 Precision Top-Pan Balance (6000 g / 0.1 g)
LS-PB6000

Precision Top-Pan Balance (6000 g / 0.1 g)

LS-HCB10 High-Capacity Laboratory Balance (10 kg / 0.01 g)
LS-HCB10

High-Capacity Laboratory Balance (10 kg / 0.01 g)

LS-HDB5 Hydrostatic Density Balance System (5000 g / 0.1 g) | ASTM C127, ASTM C128, AASHTO T84, AASHTO T85, EN 1097-6
LS-HDB5

Hydrostatic Density Balance System (5000 g / 0.1 g)

ASTM C127ASTM C128AASHTO T84AASHTO T85EN 1097-6
LS-MA100 Halogen Moisture Analyzer (100 g / 1 mg)
LS-MA100

Halogen Moisture Analyzer (100 g / 1 mg)

Laboratory Weighing Equipment Laboratory Setup

Plan a complete Laboratory Weighing Equipment laboratory around your daily methods. Lithostek integrates equipment configuration, performance verification, calibration documentation, operator training, and service support for ASTM C127, ASTM C128, AASHTO T84, EN 1097-6 workflows in construction materials testing laboratories.

Consult Engineering

Frequently Asked Questions

Semi-micro balances commonly provide 0.01 mg readability over a defined fine range, analytical balances commonly provide 0.1 mg readability, and precision balances trade some readability for a larger capacity and more robust routine handling. The correct choice depends on sample mass, permitted uncertainty, environment, and calibration workflow.

No. Readability is the smallest displayed increment. Repeatability, linearity, eccentric loading, calibration, environmental conditions, sample handling, and minimum usable weight all affect the quality of the final result.

Yes. Hydrostatic configurations can include a top-pan balance, support frame, suspension assembly, immersed basket, water vessel, and drainage hardware. The specimen size, tare load, basket geometry, capacity, readability, and target ASTM, AASHTO, or EN workflow are confirmed before quotation.

No. ISO/IEC 17025 applies to competent testing and calibration laboratories, not as a blanket product certification. Factory verification, traceable calibration, accredited calibration, and test-weight documentation are separate quotation items and must be confirmed for the destination market.

Need More Information?

Contact our team to learn more about our laboratory weighing equipment solutions and find the perfect equipment for your needs.

Get A Quote
RETURN TO TOP ↑