EN 12390-3 concrete compression testing equipment: compare 2000 and 3000 kN machines, specimen preparation, fixtures and calibration requirements.
EN 12390-3 describes compressive strength testing of hardened concrete specimens. Select the specimen format and preparation required by the project, then match the testing machine and fixtures to its geometry and expected failure load. EN 12390-4 addresses the compression testing machine requirements.
Compare LS-CM2000A (2000 kN), LS-CM3000A (3000 kN) and LS-CM3000P (3000 kN) using specimen dimensions, expected failure load, calibrated force range, bearing blocks and clearances. Add the required molds and end-preparation equipment. An end grinder prepares specimens; it does not measure their compressive strength.
Compare 2000 and 3000 kN concrete compression testing machinesRecord specimen identification, measured dimensions, end preparation, test age and maximum load with the required result fields. Request force-verification documentation identifying the machine and measurement range. Confirm the loading-control and bearing-face requirements using the governing edition before laboratory acceptance.
EN 12390-1 covers specimen and mold geometry; EN 12390-2 addresses making and curing specimens; EN 12390-4 specifies compression testing machines. ASTM C39 provides a separate route for cylindrical concrete specimens. Use the method family specified by the project.
LS-CM2000A is a 2000 kN automatic concrete compression testing machine with servo-hydraulic control for laboratory cube and cylinder testing. Quiet operation and stable loading support routine concrete quality control.
The flagship 3000kN workstation designed for high-strength concrete (HPC) research. Features a four-column high-rigidity chassis to minimize structural deformation during explosive failure capture.
Automated 3000kN concrete compression workstation for high-throughput cylinder and cube testing. The configuration combines servo-hydraulic loading, guarded test space, programmable load rates, and digital reporting for QC laboratories that need repeatable break workflows.
Automatic specimen end-surface grinding system ensuring +/- 0.05mm parallelism for absolute axial loading fidelity in compression tests.
Digital conversion kit for manual hydraulic frames. Inclues high-precision pressure transducers and a touchscreen control console with automatic data logging.