LS-HC70 Dynamic Heating & Cooling Circulator

Configured by setpoint, heat load, fluid, and circulation requirements

LS-HC70 Dynamic Heating & Cooling Circulator is a dynamic heating and cooling circulator and reactor temperature control unit for laboratory and production workflows.

Range

-70 to +200°C

+300°C upper limit available by review

Heating

3.5–15 kW

Five size configurations

Cooling at 20°C

1.3–5.0 kW

Configuration dependent

Communication

RS485

MODBUS RTU

Direct Inquiry Technical Chat

LS-HC70 Dynamic Heating & Cooling Circulator

Closed External Fluid Circuit

The sealed circulation concept supports controlled connection to compatible reactor jackets and process equipment while limiting fluid exposure.

Temperature-Resolved Cooling Data

Capacity is stated at 20, 0, -20, -40, and -60°C so laboratories can size the system at the real process setpoint.

Five Thermal-Duty Configurations

Heating and cooling packages scale from compact research loops to larger 50 L systems, with RS485 communication provided as standard.

Application & Search Guide

Testing Method

Dynamic heating and cooling circulator sizing

LS-HC70 Dynamic Heating & Cooling Circulator is sized from the external process volume, target temperature profile, heat generation, jacket area, fluid, hose length, elevation, pump duty, ambient conditions, and available power. Cooling capacity must be compared at the real operating temperature because it decreases toward the low end of the range.

Technical FAQ

How is the correct LS-HC70 configuration selected?

Provide the required temperature points, fluid, vessel or probe geometry, active heat load, ambient conditions, throughput, power supply, and documentation needs. Lithostek then checks the suitable configuration against the complete application.

Does the published temperature limit guarantee loaded performance for LS-HC70?

No. Achievable temperature and pull-down time depend on heat load, fluid, insulation, circulation, ambient temperature, connected volume, and the selected configuration. Cooling or heating capacity should be verified at the actual operating point.

Can LS-HC70 be supplied for different destination-market power requirements?

Electrical supply, plug, protection, installation clearance, communication, calibration documentation, and destination-market compliance are confirmed before quotation and production.